Q. How does the volume adjustment work on Q2 Radio?
Answer:
To increase the volume, simply tilt the radio backwards by about 45
degrees. After a short pause, the volume will begin to ramp steadily
upwards. When the desired volume is reached, return the radio to its
level position. Similarly to reduce the volume tip the radio forwards.
To mute the radio place it straight onto its front or rear face.
The turn on volume of the Q2 Radio can also be adjusted using the set-up
application. Here you can adjust the volume the radio will start at when
switched on using the switch at the back.
Related Articles
Q. With no external controls, how is the Q2 Radio adjusted?
Answer: The Q2 Radio uses a 3 axis accelerometer to detect motion, the same type of motion detector as used in popular games controllers. In this way, the volume can be adjusted by tipping the radio forward or backwards, and the station can be ...
Q. How do you turn the Q2 Radio off?
Answer: If you wish to put the Q2 Radio in standby for a few hours you can just tip it onto its front or rear face. It will stay connected to the router and will be ready to play as soon as you tip it back onto one of its sides again. To turn the Q2 ...
Q. The settings tab is blank within the Q2 Radio app and I cannot adjust the turn on volume?
Answer: Have you connected the Q2 Radio to your computer using the USB cable provided? If you look at the little computer icon in the bottom left corner of the app window, it should be green. If it is crossed out, then check your USB connection and ...
Q. When I change the initial volume of the Q2 Radio in the settings tab of the app it doesn't seem to work.
Answer: The initial volume is the listening level which the radio will go to, after being switched on using the switch on the rear panel. If it is righted from the face down or face up (mute) position, it will resume at the previous listening level.
Q. Is the Q2 Radio stereo?
Answer: Yes and no! The radio is able to receive both stereo and mono audio streams. If the built-in loudspeaker is being used, stereo audio will be down-mixed to mono to play through the single speaker. If the 3.5mm headphone socket is being used, ...