Q. Do I charge the Q2 Radio with switch in the on or off position?
Answer:
You can still use the radio while it is charging and you can charge it
with switch in the ON or OFF positions. Full charge is indicated by a
constant amber LED on the Q2 Radio (Note. the LED indicator is only shown when the switch is
in the on position).
Related Articles
Q2 Radio Battery/Charging Information
The amber LED should operate in the following manner: Amber LED Power Adapter Not Connected Power Adapter Connected Off Fully Charged n/a Slow Flash Battery Low Charging Fast Flash Battery Very Low n/a On n/a Fully Charged There is a peculiarity of ...
Q. How long does it take to charge the battery on my Q2 Radio, and how do I know when it is ready?
Answer: From completely flat, the battery will take approx 6 hours to charge. In normal use, if you charge it when the battery warning light first begins to flash, it takes about 3 hours to reach maximum capacity. You can still use the radio while it ...
Q. On my Q2 Radio, how long will the battery last on a single charge?
Answer: When listening at a moderate audio level, the battery will last up to 14 hours until it becomes completely flat. Before this, after about 6 hours, the amber LED will flash slowly to let you know it is a good idea to recharge it. After 9 hrs ...
Q. What are the meanings of the LED colours on my Q2 Radio?
Answer: Flashing amber light (while running on mains power) - The radio is charging. Flashing amber light (while running on battery) - The battery is running low. Please charge me! Flashing green light - The radio has a wireless connection and is ...
Q. Can I use a generic charger with my Q2 Radio, or replace the battery?
Answer: No, there is not enough current available from the USB port on a computer to charge the Q2. As there is a fire risk if the Li-poly battery is charged with a generic 5V, 1A mini USB charger, we can only recommend using the official Q2 charger ...